Quick Answer
Calculate NEC-Compliant Ground Fault Loop Impedance Validator
Calculator
Result Interpretation
NEC-Compliant Ground Fault Loop Impedance Validator Calculator computes Maximum Allowable Ground Fault Loop Impedance in ohm using the defined engineering formula and the input values provided.
Worked Example
Verified calculation
Given:
- Nominal RMS System Voltage = 120
- Circuit Breaker Current Rating = 15
- Instantaneous Trip Multiple (e.g., 10× for Type B, 13.5× for Type C) = 10
Expected Result:
- Maximum Allowable Ground Fault Loop Impedance = 0.64
Engineering Interpretation:
Under the given input conditions, the calculated result is: Maximum Allowable Ground Fault Loop Impedance = 0.64 ohm.
The actual numerical result is computed by the Runtime engine using the persisted tool definition. The values shown here come from automatically validated test cases.
Formula / Method
maximum allowable ground fault loop impedance = (nominal rms system voltage * 0.8) / (e.g., 10× for Type B, 13.5× for Type C * circuit breaker current rating)Formula family: formula_electrical_ground_fault_loop_impedance_validator_nec_compliance
Variables
| Symbol | Label | Role | Description |
|---|---|---|---|
| voltage_rms | Nominal RMS System Voltage | INPUT | Nominal RMS System Voltage |
| breaker_rating | Circuit Breaker Current Rating | INPUT | Circuit Breaker Current Rating |
| trip_current_multiplier | Instantaneous Trip Multiple (e.g., 10× for Type B, 13.5× for Type C) | INPUT | Instantaneous Trip Multiple (e.g., 10× for Type B, 13.5× for Type C) |
| ground_fault_loop_impedance_compliance | Maximum Allowable Ground Fault Loop Impedance | OUTPUT | Maximum Allowable Ground Fault Loop Impedance |
Calculation Steps
- Enter the nominal rms system voltage in V.
- Enter the circuit breaker current rating in A.
- Enter the instantaneous trip multiple (e.g., 10× for type b, 13.5× for type c) in 1.
- Step 1: Compute maximum allowable ground fault loop impedance.
- Read the maximum allowable ground fault loop impedance (ohm) from the results.
Engineering Summary
Calculate NEC-Compliant Ground Fault Loop Impedance Validator
Frequently Asked Questions
What does this calculator calculate?
The NEC-Compliant Ground Fault Loop Impedance Validator Calculator estimates Maximum Allowable Ground Fault Loop Impedance based on the input parameters you provide
Why is nominal rms system voltage important in this calculation?
nominal rms system voltage is directly proportional to maximum allowable ground fault loop impedance. When you enter nominal rms system voltage in V, the calculator uses it in the engineering formula to compute the output
How should I interpret the result maximum allowable ground fault loop impedance?
The calculator outputs maximum allowable ground fault loop impedance in ohm. The result is computed directly from the input values using the defined engineering formula
What units should I use for the inputs?
Enter each value in the units shown next to the input field: Nominal RMS System Voltage (V), Circuit Breaker Current Rating (A). Make sure all inputs use the specified units for consistent results
What assumptions does this calculator use?
This calculator uses automatically validated engineering formulas. Results are approximate and should be validated against site-specific conditions, applicable codes, and professional engineering judgment
Related Tools
Browse More Tools
Explore the full index of engineering calculators on this vertical site.