Electrical Engineering

Motor Power Calculator

Quick Answer

Motor electrical power: P = sqrt3 * V * I * PF

Calculator

Electrical power (kW)
—

Result Interpretation

The result is computed directly from the entered inputs using P = sqrt3 * V * I * PF.

Worked Example

Verified calculation

Given:

  • voltage = 400
  • current = 15
  • power_factor = 0.85

Expected Result:

  • power = 8.834

The actual numerical result is computed by the Runtime engine using the persisted tool definition. The values shown here come from verified test cases.

Formula / Method

P = sqrt3 * V * I * PF

Motor electrical power deterministic formula family formula_motor_power (DETERMINISTIC_AXIOM)

Standards: FormulaLibrary verified formula: formula_motor_power

Variables

SymbolLabelRoleDescription
voltage Voltage INPUT Voltage
current Current INPUT Current
power_factor Power factor INPUT Power factor
power Electrical power OUTPUT Electrical power

Calculation Steps

  1. Enter the voltage in V.
  2. Enter the current in A.
  3. Enter the power factor in ratio.
  4. Step 1: Compute electrical power.
  5. Read the electrical power (kW) from the results.

Engineering Summary

What is the result of Motor electrical power computed from the given inputs using P = sqrt3 * V * I * PF? The calculation uses deterministic formula evaluation. This tool is applicable in engineering calculation.

Engineering Applications

Off-Grid Solar Systems

Size battery banks for solar PV installations with specific autonomy requirements.

Backup Power Planning

Determine battery capacity for UPS and emergency backup systems based on daily load profiles.

RV and Marine Power

Calculate battery bank sizing for mobile power systems with limited charging capacity.

Telecom Tower Power

Engineer battery autonomy for remote telecommunications equipment.

Notes / Limitations

  • ASSUMPTION3-phase AC supply
  • LIMITATIONValid only within the stated assumptions of Motor electrical power.

Frequently Asked Questions

What does this calculator calculate?

The Motor Power Calculator estimates Electrical power based on the input parameters you provide

What units should I use for the inputs?

Enter each value in the units shown next to the input field: Voltage (V), Current (A), Power factor (ratio). Make sure all inputs use the specified units for consistent results

How does Voltage affect the results?

The voltage directly affects: Electrical power. Increasing or decreasing this value will change these output values according to the engineering formula

How should I interpret the calculated results?

The calculator provides the following outputs: electrical power in kW. Results are computed from the input values using the defined calculation method. Always verify results against project-specific requirements and applicable standards

What assumptions does this calculator use?

This calculator uses verified engineering formulas; the calculation method is based on deterministic formula evaluation, and references FormulaLibrary verified formula: formula_motor_power. Results are approximate and should be validated against site-specific conditions, applicable codes, and professional engineering judgment

When is this calculation useful?

The Motor Power Calculator is useful during preliminary design, feasibility studies, and quick engineering checks in engineering calculation projects. It helps engineers and designers estimate key parameters before proceeding with detailed analysis

Technical Details
Assumption
3-phase AC supply
Limitation
Valid only within the stated assumptions of Motor electrical power.

Browse More Tools

Explore the full index of engineering calculators on this vertical site.